Black Box MT850A Compact T1 - Release 6.1 6-9, Configuration, Switch Function Description

Compact T1 - Release 6.1 6-9
T1 Controller Card
Configuration
DIP Switch Settings
On the front of the TDM Controller card are DIP switches you can use to configure the
unit locally.
Switch Function Description
ACO Alarm Cut
Off 0 = Alarm contacts enabled (close when alarm occurs). Default.
1 = Alarm contacts disabled (open).
ST Self Test 0 = Normal operation. Default.
1 = Perform Self Test.
OPT Spare
RST Reset 0 = User-configured operation. Defau lt.
1 = Reset configuration to factory defaults, and reset CLI
password.
T1-1
T2-1 Line Coding 0 = B8ZS. Default. 1 = AMI
T1-2
T2-2 Line Loopback 0 = Loopback off. Default. 1 = Loopback on
T1 3-4
T2 3-4 Framing 0 = ESF (Extended Superframe). Default. 1 = D4
T1 5 - 6
T2 5 - 6 Signaling
Switch 3 Switch 4 Switch 5 Switch 6 Setting
0 1 1 1 TR-08 A-Shelf with FDL, 16-bit Alarm frame
1 0 0 0 TR-08 A-Shelf with FDL, 13-bit Alarm frame
1 0 0 1 TR-08 A-Shelf with FDL disabled
1 0 1 0 TR-08 B-Shelf
0 0 0 0 Loop Start/Ground Start. Default.
0 0 0 1 E&M Immediate Start with ringback. (used for D3 PLAR
and DPT)
0 0 1 0 E&M Immediate Start with ringback and Calling Party
Disconnect (CPD)