Compact T1 - Release 6.1 9-7
ISDN BRI Card
Card Configuration
Card Configuration
BRI card options are set with the Command Line Interface (CLI). For additional
information on these commands, see Chapter 5, CLI Commands.
CLI Commands
l connect
Creates two-way connections between channels
l disconnect
Removes a connection created by the co nn ect command
l set (bri)
Setup of ISDN ports (up/down, threshold, call reference value)
l set (bri) autoactivate
Set up the ISDN circuits when the FDL link cannot be used
l set (bri) mode
Set up ISDN cards mode of operation (3-DS0)
l set (bri) pmsync
Set up the BRI card source for performance monitoring synchronization
l set (ds0)
For cross-connect to ISDN, must be data type
l status (ds1)
Displays line status or performance statistics of a specific DS1
l set clock
Set the primary and secondary (clock1/clock2) master transmit clock source
l show (bri)
Displays BRI port configuration
l show clock
Displays actual clock source
l show (ds1)
Displays DS1 configuration
l status (bri)
Displays port status or performance stat is tics for the specified BRI
l status clock
Displays actual clock status and source