Compact T1 - Release 6.1 5-257
CLI Commands
status
status (ds1)
Use the status (ds1) command to display the current status of the specified DS1.
Syntax: status {ds1-addr} [performance] [history]
Where you can either specify a {slot:port} address to display an individual port
or range of ports.
Example: > status a:1
SLOT A:
Status for DS1 1:
Receive: Traffic
Transmit: Traffic
Loopback: OFF
{ds1-addr}
In the form of {slot:port}.
[performance]
Display current performance statistics for the specified port or ports.
[history]
Display historical performance statistics for the specified port or ports.
slot A for the controller card, or 1-6 for service cards.
port Port number or range.