Black Box MT850A connect (router-voice) (t1|fxs)

5-40 Compact T1 - Release 6.1
CLI Commands
connect
connect (router-voice) (t1|fxs)
Use the connect (router-voice) (t1|fxs) command to create two-way connections between the
CMG voice channels and DS0 channels of an FXS or T1 service card or controller T1. The
CMG only supports connections between CMG voice channels and FXS or T1 DS0s utilizing
loop start signaling.
Syntax: connect {cmg_voice-addr}
{slot:port|slot:port:channel}
Use the disconnect command to delete connections.
Example: connect A:2:1-12 5:1:1:1-12
Connects 12 channels on port address #2 (DS1) on the controller card (slot A)
to the first 12 voice channels on the CMG in slot 5.
{cmg_voice-addr}
In the form {slot:voip:port}
{slot:port|slot:port:channel}
slot The slot number (1-6) that contains the CMG card.
voip To designate VoIP 1:1 is used.
channel Channel number for the router is 1-48, range or all
slot A for the controller card, or 1 - 6 for service cards.
port Port number or range (port must be a T1).
channel Channel number or range, for T1 ports.