Compact T1 - Release 6.1 5-149
CLI Commands
set
set (router) voip rtcp cname
Use the set (router) voip rtcp cname command to specify the name to be used for the
CNAME field of Real-Time Control Protocol (RTCP) packets.
Syntax: set {cmg_card-addr} voip rtcp cname {gatewayid|"name"}
Example: set 3 voip rtcp cname gatewayid
The example will set the VoIP RTCP CNAME to the same as gateway ID, on
the CMG card in slot 3.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{gatewayid|"name"}
Default is gatewayid.
set (router) voip rtcp interval
Use the set (router) voip rtcp interval command to specify the time interval between
RTCP reports.
Syntax: set {cmg_card-addr} voip rtcp interval {seconds}
Example: set 3 voip rtcp interval 0
The example will turn off RTCP reporting for the CMG card in slot 3.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{seconds}
Interval time is in seconds, range is 0 to 255. If zero, RTCP reporting is turned off. Default
is 5 seconds.
gatewayid Use the gateway ID in the CNAME.
name Identifying the gateway, maximum 64 characters, enclosed in quotes.