Compact T1 - Release 6.1 5-73
CLI Commands
set
set (bri) pmsync
Use the set (bri) pmsync command to set the source for performance monitoring
synchronization.
Syntax: set {bri_card-addr} pmsync {internal|switch}
Example: set 4 pmsync internal
To set the performance monitoring source to internal for the BRI in slot 4.
{bri_card-addr}
The slot number (1-6) that contains the BRI card.
{internal|switch}
Set the operating mode to one of the following:
internal Set source to the internal to the system
switch Set source to the switch