Compact T1 - Release 6.1 5-57
CLI Commands
disconnect
disconnect

disconnect

Remove a connection created using the connect command.
Syntax: disconnect
{slot|slot:port|slot:port:channel|slot:port:trunk}
Example: disconnect A:2:1-24 3:1
Disconnects all 24 channels on port address #2 (DS1) on the controller card (slot
A) to port address #1 V.35 in slot 3.

NOTE: The operator can remove connections for all of a slot {slot}, a port

within a slot {slot:port}, or for specific channel {slot:port:channel}

{slot|slot:port|slot:port:channel|slot:port:trunk}
exit
Use the exit command to log out of the Command Line Interface (CLI).
Syntax: exit
Example: > exit
slot A for the controller card, or 1 - 6 for service cards.
port Port number or range.
channel Channel number or range, for T1 ports.
trunk Trunk number for this port, 1-24.