Compact T1 - Release 6.1 14-9
Router (CMG) Card
Card Configuration
l add (router) static dns host
Add a static DNS host record
l add (router) uploaduser
To specify a host that is allowed to upload configuration/software files
l add (router-lan) filter
Add an address filter to the table of Layer 2 fi lter applied specified LAN
interface
l add (router-lan) secondary ip address
Add a secondary IP address and subnet to the specified LAN interface
l add (router-lan) static
Add static elements on the specified LAN interface
l add (router-wan) firewall
Add a firewall rule to a WAN
l add (router-wan) gre network
Add a "by network" GRE tunnel to a WAN
l add (router-wan) nat bypass
Add subnets to the list of source addresses that will not be subject to NAT
translation when passing though a NAT enabled WAN interface
l add (router-wan) static
Add static elements on the specified WAN interface
l clear (router) ip address table
Flush the learned entries from the IP addr ess table for the specific interface
from the specified router card
l clear (router) log
Clear the CMG event log on the CMG Router card
l clear (router) mac address table
Flush the learned entries from the MAC address table for the specific
interface from the specified router card
l clear (router) mgcp stats
Set all MGCP statistic counts to zero on the CMG Router card
l connect (router-trunk) (t1)
Creates two-way connections between the router port trunk connections and
any DS0 channels of the service card or controller