4-4 Compact T1 - Release 6.1
Configuration
Basic System Setup
Basic System Setup
Following is a quick reference to some of the common tasks in configuring the
Unit.

Initial Setup

Use the following commands for your initial se tup, for further information see the
specific command listed in Chapter 5, CLI Commands .
Command Description
set local off Disables DIP switches.
set date {mm/dd/yyyy} Set the date used for event logging
set time {hh:mm:ss} Set the time used for event logging
set id {"id-name"} Set a system ID name
set clock1 {slot:port}
internal Set the primary clock source
set clock2 {slot:port}
internal Set the secondary clock source
set ethernet ip address
{ip-addr} {mask} Set the ethernet IP address, in the
conventional IP address format
set ip gateway {ip-addr} Set the IP gateway, in the conventional IP
address format