5-122 Compact T1 - Release 6.1
CLI Commands
set
set (router) mgcp quarantine
The set (router) mgcp quarantine is a interoperability command to specify the default
quarantine handling method that the CMG will employ if the call agent has not sent an
explicit quarantine handling value in the last Request Notify message. This command
applies to the CMG Router card only.
Syntax: set {cmg_card-addr} mgcp quarantine {loop|step}
{discard|process}
Example: set 1 mgcp quarantine loop process
The example sets the default quarantine method for the CMG card in slot 1.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{loop|step}
{discard|process}
set (router) mgcp report hookswitch
The set (router) mgcp report hookswitch is a interoperability command to specify wether
the hookswitch events (offhook, onhook and flashhook) will always be reported to the call
agent when they occur ("persistent event"), or whether an event request must be made by
the call agent first. This command applies to the CMG Router card only.
Syntax: set {cmg_card-addr} mgcp report hookswitch
{always|onrequest}
Example: set 1 mgcp report hookswitch onrequest
The example will set the MCGP hookswitch reporting mode to wait for a request
from the call agent, for the CMG card in slot 1.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{always|onrequest}
loop Can generate multiple notifications to a request notify
step Generate at most one notification to a request notify (Default)
discard Discard events that are in the quarantine buffer
process Process events that are in the quarantine buffer (Default)
always Always report hookswitch events (Default)
onrequest Wait for a request from the call agent before reporting hookswitch events