5-284 Compact T1 - Release 6.1
CLI Commands
store
store
The store command is used to upload a software file from a defined slot to a defined location
on a PC, via TFTP. Currently uploads for general use are only permitted for the Controller and
Router card configuration files.
Syntax: store {number} tftp {ip-addr} {"file-name"}
Example: store 5 tftp 192.168.2.35 "d:\AditBackup\file.cfg"
Filename: d:\AditBackup\file.cfg
Source IP Address: 198.162.3.196
Target IP Address: 192.168.43.52
Source Card Slot: 5
Source Card Type: RTRx1
’store tftp’ will be executed with the above parameters.
A TFTP server must be running on the host system.
Do you really want to do this? y
Card software download in progress. Please be patient...
Software transfer command completed.
{number}
Slot number (1 to 6) that you are uploading the software from.
{ip-addr}
Host IP address in the form of xxx.xxx.xxx.xxx, where xxx is a number from 1 to 255. If
not supplied, the host IP address from the database will be used.
{"file-name"}
This will name the configuration file that you are storing. File must be a .cfg file and
enclosed in quotes.