Compact T1 - Release 6.1 2-3
Physical Installation
Assembly of Unit
Assembly of Unit
The cards should be positioned in the chassis as follows:
Note: Slots are labeled on the top and the bottom of the chassis.
lPower Supply in the POWER Slot
lT1 Controller in Slot A
lService Cards can be in any slot 1 through 6.
Note: When an Unit is mounted to the wall, ca rds that use the front cable
connections should be loaded from Slot 6 to 1. This will minimize card access
issues due to cable interference.
lAlways install blank faceplates in any unused slots.
Service Card Slots
123456
APOWER