10-2 Compact T1 - Release 6.1
OCU-DP Card
Overview
Overview
The Single and Quad Port all-rate OCU-DP Service Cards provide electrical and
physical termination of the 4-wire Digita l Data Service (DDS) that is traditional ly used
to interconnect lower-speed serial synchronous Data Terminal Equipment (DTE)
devices such as routers, Frame Relay Access Devices (FRAD), or video conferencing
equipment. Now DDS can be integrated with DS0 voice, fractional T1 data, ISDN, and
IP services – over multiple T1s or DS3s. This enables service providers to deliver
transport for legacy enterprise data n etworking or Common Channel Signali ng (CCS)
circuits commonly used in Signaling System 7 (SS7) telephone networks using one
card for all standard DDS types. Plus, it can be used as a replacement for low-density,
unmanaged D4 channel banks.
The OCU-DP Service Cards provide scalable, independently configurable,
synchronous data service rates from 2.4 Kbps to 64 Kbps, including Switched 56 Kbps
data rates. Up to eight OCU-DP cards can be inserted into any of t he ser vice card slots
of the Compact T1, providing up to 32 DDS connections. These cards enable industry
leading density and cost per port at Central Offices (COs) hub and collocations
(COLOs) and cell sites.
For example, the OCU-DP ports can be groomed and mapped into any of the DS1 or
DS3 ports of the Controller. The Compact T1's (3/1/0) digital cross-connect
functionality offers DS0 service grooming, T1 drop-and-insert, and voice access
integration not available in traditional mul tiplexers.
The OCU-DP Service Cards have several local and remote management options
available through the Controllers. Cards can be locally configured and managed usi ng
the Command Line Interface (CLI). Remote management is accomplished di rectly over
either an in-band DS0 management channel or a separate SNMP network connection.