Compact T1 - Release 6.1 4-17
Configuration
Setup of DS0 Management Channel
Provision DS0s for data and cross-connect to the outgoing T1Configure the Router
Command Description
disconnect a Disconnects all connections to slot a (controller)
set a:1:all type data Sets all DS0s on T1-1 to data signaling type
set a:2:all type data Sets all DS0s on T1-2 to data signaling type
connect a:1:1-4 a:2:1-4 Connects first four DS0s of T1-1 of the controller to
first four DS0s of T1-2.
connect a:1:6-9 a:2:6-9 Connects DS0s 6-9 of T1-1 of the controller to
DS0s 6-9 of T1-2.
connect a:1:11-14 a:2:11-14 Connects DS0s 11-14 of T1-1 of the controller to
DS0s 11-14 of T1-2.
connect a:1:15-19 a:2:16-19 Connects DS0s 16-19 of T1-1 of the controller to
DS0s 16-19 of T1-2.
connect a:1:21-24 a:2:21-24 Connects DS0s 21-24 of T1-1 of the controller to
DS0s 21-24 of T1-2.
Command Description
set 6 default Sets the Router in slot 6 to it’s default settings
add 6 snmp trap "public"
192.168.0.254 "LocalUnit" Configure the Router card trap address
set 6:1 ip address
192.168.0.1 255.255.255.0 Configure the LAN IP address
set 6 lmi disable Disable PVC management for Frame Relay conne ctions
connect a:2:5 6:1:1 Connect the timeslot to the WAN port.