Compact T1 - Release 6.1 4-19
Configuration
Setup of DS0 Management Channel
Setup the Profile for Site CRemote Site A Configuration
Command Description
connect a:2:15 6:1:3 Connect the timeslot to the WAN port.
add 6 remote "SITE-C" Add another WAN profile named SITE-C
set 6:1:3 encapsulation fr Specify the encapsulation for the profile
set 6 "SITE-C" trunk 3 Specify the trunk number for the profile
set 6 "SITE-C" dlci 16 Specify the DLCI number for the profile
set 6 "SITE-C" up Enable the profile
add 6 "SITE-C" static ip
network 192.168.1.103
255.255.255.255 1
Specify the IP address of the Compact T1 at the far end
set snmp nms 1 192.168.0.254 Set up SNMP Trap address for the Compact T1
Command Description
disconnect a Disconnects all connections to slot a (controller)
set a:1:all type data Sets all DS0s on T1-1 to data signaling type
set a:2:all type data Sets all DS0s on T1-2 to data signaling type
disconnect 6 Disconnects the router in slot 6
set 6:1:all type data Sets all DS0s on slot 6 to data signaling type
connect a:1:1-4 a:2:1-4 Connect channels to cell site
set ipds0 assign a:1:5 Assign channel to IPDS0 management channel
set ipds0 ip address
192.168.1.101 255.255.255.0 Configure IPDS0 ip address
set ipds0 up Enable IPDS0
set ipds0 navalarm off Suppress IPDS0 alarm
set snmp nms 1 192.168.0.254 Set up SNMP Trap address for the Compact T1