Compact T1 - Release 6.1 4-9
Configuration
Basic System Setup
Set Up the OCU-DP Card

The following is a basic setup for the OCU-DP card.

Command Description
set {ocudp-addr} baud
{2400|4800|9600|19200|38400|
56000*|64000}
Set the OCU-DP Baud rate.
Where ocudp-addr = {slot:port} of the
OCU-DP card to apply settings to
set {ocudp-addr} up Set the OCU-DP port 1 up
show {ocudp_card-addr} Show the OCU-DP card settings.
Where ocudp_card-addr = {slot} of the
OCU-DP card
disconnect a Disconnects all connections to slot a
(controller)
set {ds0-addr} type data Sets a DS0 data signaling type
connect {ds0-addr}
{ocudp-addr} Connects DS0 (in previous step) to OCU-DP
port (in previous step)
show connect
(ocudp_card-addr} Displays connect information for OCU-DP
card