14-14 Compact T1 - Release 6.1
Router (CMG) Card
Card Configuration
l set (router-trunk) voice bandwidth limit
Set percentage of bandwidth on the trunk that is reserved for routed or
bridged data
l set (router-voice) algorithm preference
Specify the list of voice coding algorithms to be supported for VoIP calls
l set (router-voice) cpd
Configure how calling party disconnect should be signaled to an endpoint
l set (router-voice) default
Specify the list of voice coding algorithms to be supported for VoIP calls
l set (router-voice) dtmfrelay
Specify the encapsulation to use on the Router interface
l set (router-voic e) echo cancellation
Enable/disable echo cancellation
l set (router-voice) echo tail
Set the maximum time between the signal and its echo
l set (router-voice) endpoint prefix
Set the prefix and suffix of the MGCP endpoint names
l set (router-voice) log start
To start logging events to the CMG text log
l set (router-voice) log stop
To stop logging events to the CMG text log
l set (router-voice) rxgain
Set gain on receive side for voice channel
l set (router-voice) silence
Enable/disable silence suppression
l set (router-voice) slash
Suppresses the implied slash "/" between the endpoint prefix and suffix
l set (router-voice) tos
Set gain on transmit side for voice channel
l set (router-voice) txgain
Set the gain on the transmit side (TDM-to-packet) voice path
l set (router-voice) up
Set the specified voice channel up or down