4-8 Compact T1 - Release 6.1
Configuration
Basic System Setup
Establish a Static Channel Connection

Use the following commands to establish a static channel connection.

Set Up a ISDN BRI Service

Use the following commands to set up a ISDN BRI Se rvice. See the set (bri) command

for details.

Command Description
set {slot:port:channel} type
{voice|data} Set the channel type for the channel you
want to map. See set (ds0) command for
details
set {slot:port:channel} signal
{emdw|emi|emicpd|emw|gs|ls|pl
ar|r2}
Set the signaling option for the channel you
want to map. See set (ds0) command for
details
connect {slot:port}
{slot:port} Connect the channels. See the show connect
command for details
Command Description
set {slot:port} up Put the ISDN line In-Service
set {slot} mode
{lt3ds0|lt4to1tdm|nt3ds0} Set the ISDN mode
set {slot:port} crv {1-768} Set the Call Reference Value.
set {slot:port} threshold
{day|hour} {es|ses} Set the threshold for the IDSN lines
set {slot} pmsync
{adit|switch} Set the source for performance monitoring
synchronization
set {slot:port} autoactivate
{on|off} Only used in 4 to 1 mode. Establishes the D
channel when the FDL link can not be used