5-38 Compact T1 - Release 6.1
CLI Commands
connect
connect (router-trunk) (t1)Use the connect (router-trunk) (t1) command to create two-way connections between the
Router port trunk connections and any DS0 channels of the service card or controller.
Syntax: connect {rtr_trunk-addr}
{slot:port|slot:port:channel}
Use the disconnect command to delete connections.
Example: connect A:2:1-12 5:1:1
Connects 12 channels on port address #2 (DS1) on the controller card (slot A)
to trunk 1 on the Router in slot 5.
{rtr_trunk-addr}
The Router (IP or CMG) trunk address is in the form {slot:port:trunk}.
{slot:port|slot:port:channel}
slot The slot number (1-6) that contains the Router (IP or CMG) card.
port Port number is 1.
trunk Trunk number for this port, 1-24.
slot A for the controller card, or 1-6 for service cards.
port Port number or range (port must be a T1).
channel Channel number or range, for T1 ports.