CHAPTER 7: Results
7.2 Viewing Autotest Results
The Project Name screen shows a Circuit ID and a PASS/FAIL icon for each saved Autotest. The following PASS/FAIL icons can be displayed.
Passed twisted pair Autotest.
Failed twisted pair Autotest.
Passed twisted pair Autotest with graphs.
Failed twisted pair Autotest with graphs.
Passed fiber Autotest.
Failed fiber Autotest.
To view detailed information about a saved Autotest, use the
FOR TWISTED PAIR CABLING:
The Autotest Results screen will be displayed. The name of the Autotest, the cable that was used to run the test, and the overall test result (PASS or FAIL) are shown.
All measurements that were performed during the Autotest are listed in the left
column. Passed tests will be marked with a | . If a test result did not pass, the | |
test name will be followed a | (Fail) symbol. |
|
111
