CHAPTER 4: Setup
4.2 Set Reference
Connect OMNIScanner and OMNIRemote through their test connector ports using the test cable and the MOD 8 adapter. Select Set Reference to display the SET REFERENCE screen. OMNIScanner will immediately start to communicate with OMNIRemote.
While the reference data is being established, a gauge indicates the progress.
OMNIScanner notifies you when the process has been completed. The Remote Info screen will be displayed.
NOTE
Set Reference is only needed to periodically verify and establish the signal reference for attenuation. The function does not affect any other measurements.
Press ESC to return to the Setup screen.
53
