OMNISCANNER
2 m Launch Cable
| RX |
850 nm 1300/1310 nm | TX |
Cable under Test
2 m Launch Cable
TX | 850 nm 1300/1310 nm |
RX |
|
3.8 Fiber Autotest Results
Once the Autotest is completed the Autotest screen will be displayed.
The arrows at the top of the screen indicate the direction of the light.
‚points to the result measured from OMNIRemote to OMNIScanner. ˇ points out the result measured from OMNIScanner to OMNIRemote.
The overall test result for each fiber is located right below the arrows,
(PASS) or 
(FAIL).
The name of the Autotest is displayed at the top of the screen followed by the name of the fiber.
When a bidirectional test was performed an icon for 
OMNIScanner or 
OMNIRemote will appear next to the fiber‘s
name.
Press 
or 
to view results for the fibers with light transmission in the opposite direction. The arrows flip vertically to indicate that there are two results for each fiber, one from TX to RX and one from RX to TX.
50
