
OMNISCANNER
Press (Diagnostics) to view and manage stored test results.
Press (Results) to view and manage stored test results.
2.3 Certification of Network Installations
OMNIScanner is designed to efficiently certify cabling installations through its Autotest feature. Test results, test specifications, and cable types are organized into Projects. The Project, its test specifications, and its cable types are selectable from the OMNIScanner Project screen.
OMNIScanner contains a number a predefined projects, grouped by test standards to allow easy and fast operation.
The typical order of operations performed when certifying a cable installation is as follows:
Preparation
Before initial certification, do the following:
1.Run a
2.Select the appropriate Project, Autotest specification, and Cable type.
Certification
Do the following for each installed cable to be tested:
3.Attach OMNIScanner to one end of the link, which is typically at the patch panel in a wiring closet.
4.Attach OmniRemote to the corresponding outlet at the other end of the cable link.
5.Run Autotest.
6.Save test results.
Completion
At the end of the day or shift, the test results are uploaded using Scanlink Tools software.
24