Black Box TS1003A, TS1002A, TS1000A-R5 manual 112

OMNISCANNER

NOTE

The list of Autotests varies depending on the kind of Autotest that was performed.

(See Chapter 5, Measurements, for detailed information about each measurement screen.)

Use the up-arrow and down-arrow keys on your keypad to highlight a test. Press ENTER to open the test result screen for that particular test.

Use the left-arrow or right-arrow on your keypad to quickly page through all test results.

NOTE

If the (Save Graphs) or (Save with Graphs to MMC) option was selected when saving the Autotest, graphs associated with NEXT, Attenuation, Return Loss, PSNEXT, ELFEXT, ACR, PSELFEXT, and/or PSACR are available when viewing Autotest results. Only the graphs that were selected in the Autotest Options screen will be saved. (See Chapter 3, Setup: Autotest Options for information about selecting graphs to be saved.)

Press ESC to return to the PROJECT NAME screen.

Press ESC to return to the RESULTS screen.

112