Black Box TS1002A, TS1003A OMNIFiber’s LED Indicators, Attaching the OMNIScanner Fiber Adapters

CHAPTER 1: Introduction

1.12 OMNIFiber’s LED Indicators

LED		Color	Description
	850 nm	Green	OMNIFiber is
			transmitting at 850
			nm
	850 nm	Green	OMNIFiber is
		(flashing) transmitting
			modulated light at
			850 nm
	850 nm	Orange	Part 1 of Two Way
			Test completed,
			switch fibers
1300/		Green	OMNIFiber is
1310 nm			transmitting at 1300/
			1310 nm
1300/		Green	OMNIFiber is
1310 nm		(flashing) transmitting
			modulated light at
			1300/1310 nm
1300/		Orange	Part 1 of Two Way
1310 nm			test completed,
			switch fibers

1.13 Attaching the OMNIScanner Fiber Adapters

NOTE

Both OMNIFiber adapters have dust caps to protect the ST connectors from dirt. Keep the ST connectors covered when the Fiber Adapters are not in use. This helps to ensure that contaminants from handling fiber do not affect test measurements.

NOTE

Both OMNIFiber adapters have 160-pin connector covers. Keep the 160- pin connectors covered when the Fiber Adapters are not in use.

To attach a fiber adapter to OMNIScanner, proceed as follows:

1.Remove the 160-pin connector cover from the OMNIFiber adapter by gently pressing the black pushbutton latches. The cover will be released.

17