Black Box TS1003A, TS1002A, TS1000A-R5 manual Scanlink Tools Software, OMNIScanner’s Display

OMNISCANNER

compared against the selected LAN standard for instant PASS/FAIL analysis. OMNIFiber measures loss at 850 and 1300 nm over multimode fiber and at 1310 nm over single-mode fiber.

Up to 1000 Autotests can be saved to nonvolatile memory. Saved results can be easily uploaded to the PC with Scanlink software.

1.5 Scanlink Tools Software

PC-based software expands OMNIScanner’s user interface and aids with the management of projects. Scanlink Tools consist of the OMNIScanner Configuration software, the Scanlink Upload software, and the OMNIScanner Remote Control software. These programs allow you to store, retrieve, manage, edit, and print network cabling information. Scanlink Tools; provide the ability to create professional reports, remote control OMNIScanner, and define cable and project configurations that can be downloaded to OMNIScanner.

1.6 OMNIScanner’s Display

Scanner Display	Function
1-2 or 12/36:	The paired numbers in the display indicate wire pairs. For
	example, 1-2 indicates the wire pair of pins 1 and 2. 12/36
	indicates two wire pairs tested, the first pair of pins 1 and
	2, and the second pair of pins 3 and 6.
Pop-up lists:	Pop-up lists are available by pressing ENTER when the
	cursor is located on user-definable fields. A predefined
	selection list will appear, and the rest of the display will be
	inactive.
Spin Control:	The spin control is available on editable fields that allow
	for increasing or decreasing numeric values by
	depressing the up-arrow or down-arrow key.
Scrollbars:	Use the up-arrow and down-arrow key on the keypad to
	move up and down in a scrollable screen.
Graph:	Use the left-arrow or right-arrow keys to move the graph
	cursor on the frequency axis. Us the up-arrow or down-
	arrow to zoom in and out of graphs.

10