CHAPTER 3: Getting Started: Fiber Optic Networks
4.Once the reference value has been set, OMNIScanner will display the FIBER INFO screen.
5.Press ESC to return to the SETUP screen.
NOTE
If the test configuration changes, a new reference value needs to be established.
3.5 Project Selection
A project name must be selected for test result management. Autotests and Cables were previously assigned to a specific project through the use of the OMNIScanner Configuration software. (See Chapter 9, Uploading and Printing for further information about OMNIScanner Configuration.)
The Project feature is very useful for grouping test results and eases uploading and sorting of Autotests stored in the scanner.
1.Use the
2.Select the appropriate Project from the
43
