A.5 Measurement Port (Test Interface)
•Ultra-low Crosstalk test interface that supports testing of all four pairs
•160-pin test interface connector, which exceeds 10,000 mating cycles
•Variety of test cables and adapter modules support testing of BNC, 110 block, and shielded modular jack and plug interfaces
A.6 Serial Port
Connector—DB9
Baud Rate—300 to 57,600 baud
Parity—None
Length—8 bits
Handshaking—None, RTS/CTS, and X-ON/X-OFF
A.7 Universal Serial Bus
•Type: Self-powered device
•Link: 12 MBps full-speed bulk transfer with two 128-byte FIFOs and automatic retry
•Connector: Type “B” receptacle
•Recommended cable: Full-speed shielded twisted-pair with A-B plugs (USB V1.1 compliant)
A.8 MultiMediaCard Interface
•Link: 4.6 MBps SPI mode with 16-bit CRC
•Format: 512-byte sector size, 32-bit FAT file system
•Socket: Non-locking seven-contact with ejector
•Recommended Media: Scandisk SDMB-xx or Infineon MultiMediaCard-F00xx (xx denotes memory size in megabytes)
