OMNISCANNER
4.6 Configurations
Select Configurations to display the CONFIGURATIONS screen. It contains a list of all configurations which are currently stored on the MultiMedia Card that can be read by OMNIScanner2. (See Chapter 11, MultiMedia Card for more information about the MMC).
The predefined Default Configuration is always present and can be used to reset OMNIScanner to the factory default. It contains the following projects: TIA, ISO/IEC, VENDOR, Microtest, IEEE, ATM, AS/NZ, ANSI.
OMNIScanner2 only: Use the
Press 
(Set Default) to select it as the Configuration to be used and to return to the SETUP screen.
While the selected Configuration is being loaded onto OMNIScanner2, a gauge indicates the progress. Do not remove the MultiMedia Card from the MultiMedia Card reader during the data transfer.
4.7 Autotest Run Options
Select Autotest Run Options to display the RUN OPTIONS screen. With the presented options you are able to further customize the way OMNIScanner will perform an Autotest.
Press 
if you want OMNIScanner to abort the Autotest if a FAIL occurs.
The Abort on Fail box will be checked 
.
68
