Bradley Smoker PLC-5 Input destination, Enter the file number decimal of the source data

Communicating with a PLC-5 Adapter Channel 7-9

To create the discrete transfer configuration files, use the adapter mode configuration screen in your programming software.

specify the discrete transfer configuration files

IMPORTANT

The controller determines the number of words used by the file according to the rack size you specified.

In this Field	Define	By Doing the Following
Input destination	The location where the scanner (host	1.Enter the file number (decimal) of the source data.
	device) places output words into the	2.Enter the word number (decimal) of the source data.
	adapter’s input file
		Specify an input image, output image, integer, BCD, or Hex file.
		For example: if you use file N7:0 and the rack size is FULL, the scanner
		places the 8 discrete words in file N7 words 0-7 (upper byte of first word is
		for status).
Output source	The location where the adapter places	1.Enter the file number (decimal) of the source data.
	discrete output words into the scanner’s	2.Enter the word number (decimal) of the source data.
	discrete input file
		Specify an input image, output image, integer, BCD, or hex file.
		For example: if you use file N7:10 and the rack size is FULL, the adapter
		channel places 8 discrete words in file N7 words 10-17 (upper byte of first
		word is for status).

For more information on configuring this file, see the channel configuration documentation for your programming software.

Publication 1785-UM012D-EN-P - July 2005