Bradley Smoker PLC-5 user manual Interpreting Error Codes, Code Hexadecimal Description

Communicating with Devices on an Ethernet Network 11-33

Interpreting Error Codes	When the controller detects an error during the transfer of message data, the
	controller sets the .ER bit and enters an error code:
	Code - Hexadecimal	Description
	(word 1 of the control block)	(displayed on the data monitor screen)
	0010	No IP address configured for the network
	0011	Already at maximum number of connections
	0012	Invalid internet address or host name
	0013	No such host
	0014	Cannot communicate with the name server
	0015	Connection not completed before user-specified timeout
	0016	Connection timed out by the network
	0017	Connection refused by destination host
	0018	Connection was broken
	0019	Reply not received before user-specified timeout
	001A	No network buffer space available
	0037	Message timed out in local controller
	0083	Controller is disconnected
	0089	Controller’s message buffer is full
	0092	No response (regardless of station type)
	00D3	You formatted the control block incorrectly
	00D5	Incorrect address for the local data table
	1000	Illegal command from local controller
	2000	Communication module not working
	4000	Controller connected but faulted (hardware)
	5000	You used the wrong station number
	6000	Requested function is not available
	7000	Controller is in program mode
	8000	Controller’s compatibility file does not exist

Publication 1785-UM012D-EN-P - July 2005