Bradley Smoker PLC-5 user manual 11-29

Communicating with Devices on an Ethernet Network 11-29

To see the Sample Extended Format page:

1.Go back to the Custom Data Table Monitor page.

2.In the Address column, click on the + before the T4:0 to display the Sample Extended Format:

This completes the Embedded Web Server enhancements and descriptions. Corrected anomalies and previous controller enhancements are described on the following pages.

Using Multihop Messaging You can use multihop messaging over Ethernet, so that controllers can communicate over Ethernet with ControlLogix devices or through a

ControlLogix Ethernet module (1756-ENET) to other PLC-5 and SLC controllers. You need a series E, revision D or later PLC-5 controller, and if using a sidecar module, you will need a series B or later 1785-ENET interface module.

To take advantage of these enhancements, you need RSLogix 5 programming software, release 3.2 or later.

Publication 1785-UM012D-EN-P - July 2005