Cables to Go CDM-570L manual 3Feature Configuration screen

Initial Configuration

Figure 2-3Feature Configuration screen

Figure 2-4Feature and Unlock Code dialog

Tip: The network administrator will have the feature and unlock codes. These are stored by the MAC address for the target CDM-570/570L. The target unit’s MAC address can be found by entering an I and then an E from the Main Menu shown in figure 2-1.

4.After entering the feature and unlock codes, return to the Feature Config- uration menu, shown in figure 2-3,and enter V to toggle the Vipersat Management menu item to Enabled. The unit will automatically reboot in order to implement the change for this setting.

5.When the reboot is completed, return to the Feature Configuration menu and configure the settings for Vipersat STDMA and Auto Switching according to the table below.

2-6 Vipersat CDM-570/570L User Guide