Cables to Go CDM-570L manual Delete, View

Vipersat Configuration

•Enter the TOS SCPC Switch Data Rate - Enter the desired data rate for this service type. Valid entries are from 0 to 10,000 Kbps. This setting will override the VMS set policy value.

•Enter the TOS SCPC Timeout - This timer monitors the defined packet flow. Once data stops for the duration of the timer setting, the link state will be restored to the home state condition. Valid entries are from 1 to 60 seconds.

After entering the timeout value, pressing the Enter key will update the TOS Switching Control menu with the changes.

Delete

Enter D at the command prompt in figure 3-41to Delete a ToS entry, as shown in figure 3-43.

NOTE

Figure 3-43ToS Delete prompt

Note: The value shown in the TOS Value column is the TOS ID associ- ated with the ToS entry to be deleted.

View

Entering a V at the command prompt will display the Internal TOS Table for active entries as shown in figure 3-44.

Note that, due to binary conversion, the ID value is a multiple of 4 and the Timout value is a multiple of 2.

Figure 3-44ToS View screen

3-34 Vipersat CDM-570/570L User Guide