Cables to Go CDM-570L manual Vipersat Feature Codes menu, Vipersat Management

NOTE

Menu Descriptions

The Feature Configuration screen shown in figure 3-3allows enabling and disabling CDM-570/570L features.

Use this menu to enable and disable Vipersat features such as:

•Vipersat STDMA

•Vipersat Auto Switching

•Vipersat File Streamer

Note: You must enable and disable these Vipersat features using this screen. They cannot be enabled or disabled from the Vipersat Configuration screen.

Vipersat Feature Codes menu

The Vipersat feature codes can be entered as three hexidecimal digits at the command prompt as shown figure 3-4and determine which Vipersat features have been purchased for the target CDM-570/570L and are available for use.

Figure 3-4Feature and unlock code dialog

Similarly, unlock codes determine which CDM-570/570L features have been purchased and are available for use on the target CDM-570/570L.

Tip: You may find it more convenient to use the Vipersat Vload utility to manage feature and unlock codes.

Vipersat Management

This item is an information only display and indicates whether Vipersat Management is enabled or disabled in the target Vipersat CDM-570/570L. Acti- vation of the Vipersat Feature Code automatically enables the Vipersat Manage- ment feature.

Caution: This command must be enabled in order to use any of the Vipersat capabilities of the CDM-570/570L.

Chapter 3 - Using the Command Line Interface (CLI) 3-5