Firmware Upgrade
Figure D-15 Unit Information screen (Base Modem v1.5.1)
Download Router v1.5.3 to Image 2
Download the v1.5.3 firmware file to the Router Image 2. This insures that the latest firmware code is loaded in all images.
Get Unit Information one last time and Save the file when prompted. This file can be used to maintain a record of unlock codes and sent to Comtech Vipersat if additional features are required. The final "get Information" should look like the one displayed below.
Figure D-16 Unit Information screen (final status)
Completing Migration
Picking Up Straggler/Offline Remotes
Ideally, all Remote units will be online during the migration phase. However, in a live network this cannot be guaranteed. Therefore, Vipersat provides a way to temporarily revert the TDM outbound and Burst Controller(s) to v1.5.2 HDLC WAN Framing compatibility mode. Remotes that had lost power or otherwise were offline during the upgrade can be recovered at this time. Remotes running
Vipersat |
