Cables to Go CDM-570L manual Vipersat Stdma, Vipersat Auto Switching, Vipersat File Streamer

Menu Descriptions

Vipersat STDMA

In order to utilize the Vipersat STDMA feature in the target Vipersat CDM-570/ 570L, this feature must be enabled. Enter A at the command prompt to toggle on or off.

Vipersat Auto Switching

In order to utilize the auto switching capabilities of the target Vipersat CDM-570/570L, toggle the auto switch command to enabled by entering W at the command prompt. Vipersat Auto Switching must be enabled for networks requiring Load or Application switching to SCPC connections.

Vipersat File Streamer

Vipersat File Streamer (VPS) is an optional feature that allows rapid file trans- fers over the satellite network between host PCs that are running the client VPS application. To activate the Vipersat File Streaming capabilities of the target Vipersat CDM-570/570L, toggle this command to enabled by entering R at the command prompt.

Once the parameters on the Feature Configuration screen have been set as desired, return to the Main Menu shown in figure 3-1and enter the V command to display the Vipersat Configuration screen shown in figure 3-5.

3-6 Vipersat CDM-570/570L User Guide