Cables to Go CDM-570L manual Remove Timeout, Remove Retry Timeout

Vipersat Configuration

Figure 3-27View Remote(s) screen

The display is for information only and pressing any key will return you to the menu shown in figure 3-16.

Remove Timeout

Entering R at the command prompt shown in figure 3-16will display the Remove Timeout dialog shown in figure 3-28.Note that the menu item shown in figure 3-16shows the current setting (in seconds) for this parameter.

Figure 3-28Remove Timeout prompt

The value entered at the command prompt in figure 3-28defines the amount of time (in seconds) with no communication from a Remote to the Hub before that Remote is removed from the Burstmap. This feature is useful, for example, in an SNG application where a mobile remote has finished its assignment and has shut down.

If communications are lost for this period of time, the Remote is removed from the STDMA group, and the bandwidth resources it had been allocated are then made available for use by the other remotes remaining in the group.

Remove Retry Timeout

Entering T at the command prompt in figure 3-16will display the Remove Retry Timeout dialog shown in figure 3-29.

3-20 Vipersat CDM-570/570L User Guide