Chapter 3 - Using the Command Line Interface (CLI) 3-3
Menu Descriptions
Menu Descriptions
This section details the CLI command menus and briefly discusses the function
of each of the commands available on each menu.

Main menu

The Main Menu, shown in figure 3-1, allows configuring both the modem and
router functions of the target CDM-570/570L.
Note: The entry Vipersat Configuration shown in figure 3-1 will only
be displayed if the target CDM-570/570L has had the Vipersat
option enabled as described in the section “Setting Vipersat
CDM-570/570L Operating Parameters” on page 2-4.
Figure 3-1
Main Menu screen
A Vipersat CDM-570/570L is normally shipped with the Vipersat option
enabled. You can verify the CDM-570/570L configuration by checking that the
command line Vipersat Configuration is displayed on the menu as shown in
Figure 3-1.

Administration

The Administration Menu also contains Vipersat CDM-570/570L
commands. Entering an A at the prompt in the Main Menu, shown in
figure 3-1 displays the Administration screen shown in figure 3-2.
NOTE