Chapter 5 Receiving Faxes 5-1
Receiving Faxes
The MultiPASS C3500 has four Receive Modes:
Fax Only Mode
Fax/Tel Mode
Manual Mode
Answer Machine Mode
You set the Receive Mode during the MultiPASS installation procedure.
(See your Quick Start Guidefor details.)
You can change the Receive Mode and the Receive Fax options through
the MultiPASS Desktop Manager.See page 8-7 for details.

Receiving Documents

During reception of a fax:
If the unit runs out of paper or if the BJ cartridge runs out of ink,
the MultiPASS receives the remainder ofthe document in memory.
To stop receiving before the document is complete,press STOP.
Then press *to cancel reception.
If the ALARM light is flashing for any reason,correct the error and
then press STOP.If necessary, see Chapter 10, Troubleshooting.
If an error occurs,the MultiPASS beeps intermittently for a few
seconds.If this happens, contact the other party and have them
resend the document.
5Receiving Faxes