Canon C3500 Answer Silent Receive, Answer Number of Rings, Receive Conditions, Report Print

❍Dedcated Fax Receive (FaxOnly)—Automatically receive only fax calls

❍Manual Receive (Manual)—Require you to manually answer the incoming call and then set the MultiPASS for an incoming fax

❍Answering Machine Mode (AnsMode)—Automatically receive a call with your answering machine

❍Distinct Ring Pattern Detect (DRPD)—Automatically switch between receiving a call either as a fax or telephone call based on the ring tone for each type of call (This setting is applicable only if you subscribe to a special network service with your phone company that defines multiple ring tones for your phone line.)

Answer Silent Receive

You select this option to set the MultiPASS not to ring for an incoming fax. (This is applicable only in FaxTel Mode and Fax Only Mode.)

Answer Number of Rings

If you cleared the Silent Receive option, indicating you want the MultiPASS to ring for incoming fax calls, you specify the number of times the MultiPASS should ring for the fax call. The MultiPASS will only ring if you have connected a telephone.

Receive Conditions

You can specify how the system should handle an incoming fax under the following conditions.

❍If your computer is turned off:

You set the MultiPASS to print the fax (Print Fax) or save the fax in its memory (Save in Memory).

❍If your computer is turned on:

You set the MultiPASS to move the fax to the Desktop Manager on your computer (Upload Fax), or to print the fax (Print Fax).

Report Print

You can specify whether or not you want a report to print with each fax reception, or only when there is an error.

Restoring the Default Settings

If you want to restore the option default settings after making changes, click Use Defaults.

8-8 Setup and Other Utilities in the Desktop Manager Chapter 8