Canon C3500 Speed, Pause Duration, Error Correction ECM, Auto Start Send, Off Hook Alarm

Speed

You can set the transmission speed used to send faxes. The higher the setting, the faster the transmission. If you experience problems when sending faxes, try a lower speed setting.

Pause Duration

You can set the length of the pause that you may have to insert when dialing a long distance number.

Error Correction (ECM)

You can select this option to reduce system and line errors when sending a fax. With this option selected, the system checks each outgoing fax for lost data. If data has been lost from a portion of a page, the system transmits that portion again after confirming that all data within that portion can be transmitted successfully.

Auto Start Send

When you select this option, the MultiPASS starts scanning automatically when you enter a number and press START or when you press a speed dial number. If you don’t select this option, you must press START twice to scan the document.

Off Hook Alarm

You select this option to turn on the alarm if the telephone’s handset is off-hook.

Image Contrast

You can select a setting that determines the level of contrast in the faxes you send. The Standard setting is usually appropriate for most documents. However, based on the lightness or darkness of your original fax document, you may prefer to lighten (Lighter) or darken (Darker) the contrast for the fax transmission.

Fax Heading Position

You can select where you want the sent fax heading information (your fax number, your name, and date and time) to print on the faxes you send. This information is known as the Transmit Terminal Identification (TTI).

On Error Resend

You can select this option if you want the MultiPASS to automatically redial when an error occurs while sending a fax. If this option is selected, you also select which pages should be resent:

❍ All Pages—all pages of the fax.

8-6 Setup and Other Utilities in the Desktop Manager Chapter 8