Canon C3500 user manual LCD Menu System, Option Description/Settings

Using the MultiPASS C3500 B as a Stand-alone Fax

If you plan to use the MultiPASS C3500 as a stand-alone fax, and you do not install the MultiPASS Desktop Manager, you must enter your name and fax number from the operator panel. If you choose to use the MultiPASS C3500 this way, you will not be able to use its many features, such as speed dialing, PC faxing, or scanning.

Also, you will not be able to change the Transmit Confirmation Report to print after every transaction. (The default for the TX REPORT is to print only when there is an error in transmission.) Canon recommends that you install the MultiPASS software as described in the Quick Start Guide. See Chapter 3 for details on using the MultiPASS Desktop Manager.

NIn the United States, you are required by FCC regulations to include your name and fax number every time you send a fax. Be sure to enter this information.

LCD Menu System

To enter the LCD Menu System, press the FUNCTION button on the operator panel. Then press < or > to move between selections and press START/COPY to make a selection. Press STOP to exit the LCD Menu System.

Option	Description/Settings
USER SETTINGS
DATE & TIME	Set the date and time (24-hour clock) using the
	numeric buttons.
UNIT TELEPHONE # Enter your fax number using the numeric
	buttons (up to 20 characters).
UNIT NAME	Enter the name you want to appear at the top of
	each fax page you send (up to 24 characters).
TEL LINE TYPE	Sets the dialing method the MultiPASS uses to
	match the type of phone line you have—
	TOUCH TONE or ROTARY/PULSE.

Stand-alone Fax

Appendix B Using the MultiPASS C3500 as a Stand-alone Fax B-1