Press

START/COPY.

COPY

To stop copying at any time, press STOP. You may need to lift the operator panel to remove the document (see page 10-3 for details).

If an error occurs and the LCD displays START AGAIN, reload the document and start copying again.

NIf the LCD displays MEMORY FULL while making multiple copies

of a document, do not use the multiple copy feature for copying the document. Make single copies of the document instead (as many times as required).

You may be able to make multiple copies if you first print out any faxes that are stored in memory (see page 5-5).

Miscellaneous

If the Power Goes Out

If power to the MultiPASS is cut off, any documents stored in its fax memory will be lost. Because of this, be sure to print documents stored in memory or resend them as soon as possible. (The MultiPASS automatically prints a Memory Clear Report when power is restored. See page 10-26.)

While the power is out, the MultiPASS will receive telephone calls if a telephone is attached. However, you cannot send or receive faxes. (If you are using a cordless phone, you will not be able to make or receive calls.)

Avoid unplugging the MultiPASS unless absolutely necessary. This is the same as a power outage.

Using Switch Boxes

Canon does not recommend using a switch box with the MultiPASS. To use more than one printer, it’s a good idea to add a second parallel port to your computer.

1-20 Introduction

Chapter 1

Page 34
Image 34
Canon C3500 user manual Miscellaneous, If the Power Goes Out, Using Switch Boxes