Compaq HSZ80 manual Poweroff Switch Settings, SECONDS=nn

5–75

SECONDS=nn

As soon as the POWEROFF command is entered, all disk units in the cabinet are set to write-through. When the time interval, as represented by nn seconds, has elapsed, an orderly rundown of all units is started. When all units in the cabinet are successfully rundown, cabinet power is turned off.

Table 5–4shows what action will be taken depending on the switch settings and the results of the attempted flush:

CAUTION: If the BATTERY_OFF switch is used with the

OVERRIDE_BAD_FLUSH switch, unwritten data could be lost. Do not power off the subsystem until the unwritten data has been recovered.

Table 5–4 Poweroff Switch Settings

Battery	Override Switch	Flush	Action
Switch		Results
BATTERY_ON	OVERRIDE_BAD_FLUSH	Success	Controller and units in the cabinet are
			shutdown and the ECB is powering the
			cache module.
BATTERY_ON	OVERRIDE_BAD_FLUSH	Failure	Controller and units in the cabinet are
			shutdown and the ECB is powering the
			cache module.
BATTERY_ON	NO_OVERRIDE_BAD_FLUSH	Success	Controller and units in the cabinet are
			shutdown and the ECB is powering the
			cache module.
BATTERY_ON	NO_OVERRIDE_BAD_FLUSH	Failure	Nothing is shutdown, the ECB is powering
			the cache module, and the user is notified
			of a bad flush.

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide