Compaq HSZ80 manual ADD Unit unit-number mirrorset-name switch, Show mirrorset-name

4–5

3.Present the mirrorset to the host by giving it a unit number the host can recognize. Optionally, you can append Unit switch values. If you do not specify switch values, default values are applied. Use the following syntax:

ADD UNIT unit-number mirrorset-name switch

See “ADD UNIT,” page 5–27,for valid switches and values.

4.Verify the mirrorset configuration and switches. Use the following syntax:

SHOW mirrorset-name

5.Verify the unit configuration and switches. Use the following syntax:

SHOW unit-number

Example

The following example shows the commands you would use to create Mirr1, a two- member stripeset:

ADD MIRRORSET Mirr1 DISK10000 DISK20000

INITIALIZE MIRR1

ADD UNIT D110 MIRR1

SHOW MIRR1

SHOW D110

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide