Compaq HSZ80 manual Assigning Units through Multiple Host Adapters

4–33

NOTE: Figure 4–5shows an example of a heterogeneous host configuration. For supported host operating systems, refer to the HSZ80 Array Controller ACS Version 8.3 Release Notes.

SCSI ID 7

Windows

NT

SCSI ID 6

		Host bus
Port 1	Port 2
HSZ80 controller A
HSZ80 controller B
Port 1	Port 2
				Device bus
	D100	D101	D102	D200	D201
		Host bus

SCSI ID 6

Digital

UNIX

SCSI ID 7

CXO6488A

Figure 4–5. Assigning Units through Multiple Host Adapters

To reassign target 1 to the Windows NT server host mode, use the following syntax:

SET THIS HOST_FUNCTION (1,D)

To assign the units to each host using SCSI ID numbers, yet restrict host access by the other hosts, use the following syntax:

SET D100 THIS_PORT_1_DISABLE_ACCESS_PATH = ALL

SET D100 OTHER_PORT_1_DISABLE_ACCESS_PATH = ALL

SET D100 THIS_PORT_1_ENABLE_ACCESS_PATH = 7

SET D100 OTHER_PORT_1_ENABLE_ACCESS_PATH = 6

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide