Compaq HSZ80 manual Removing a Disk Drive from the Spareset, 14Configuring Storagesets

4–14Configuring Storagesets

2.Verify the contents of the spareset using the following syntax:

SHOW SPARESET

Example

The following example shows the commands you would use to add DISK60000 and DISK60100 to the spareset.

ADD SPARESET DISK60000

ADD SPARESET DISK60100

SHOW SPARESET

Removing a Disk Drive from the Spareset

You cannot delete the spareset—it always exists whether or not it contains disk drives. However, you can delete disks in the spareset if you need to use them elsewhere in your StorageWorks subsystem.

To remove a disk drive from the spareset:

1.Show the contents of the spareset using the following syntax:

SHOW SPARESET

2.Delete the desired disk drive using the following syntax:

DELETE SPARESET DISKnnnn

Verify the contents of the spareset using the following syntax:

SHOW SPARESET