Compaq HSZ80 manual Delete Failedset DISK20200, SET Failedset Show Failedset

5–53

DELETE FAILEDSET

Removes a disk drive from the failedset. The failedset contains disk drives removed by the controller from RAIDsets and mirrorsets because they failed or were manually removed using the SET command. Enter the DELETE FAILEDSET command before physically removing failed members from the storage shelf for testing, repair, or replacement.

You should consider defective all disk drives in the failedset. Repair or replace disks found in the failedset.

Syntax

DELETE FAILEDSET disk-name

Parameter

disk-name

Identifies the disk you want to delete from the failedset. Only one disk at a time can be removed from a failedset.

Example

This example shows how to delete DISK20200 from the failedset:

DELETE FAILEDSET DISK20200

See also

SET FAILEDSET

SHOW FAILEDSET

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide