Compaq HSZ80 manual Restart Othercontroller Restart Thiscontroller

2–19

8.Set the host function mode for the controller using the target ID numbers set in step 7. Use the following command:

NOTE: The default host function mode defaults to Host Mode A. The

HOST_FUNCTION switch changes the host function mode to a different mode.

SET THIS_CONTROLLER HOST_FUNCTION= (ID, MODE)

or

SET OTHER_CONTROLLER HOST_FUNCTION= (ID, MODE)

To change the host function mode, see “SET controller,” page 5–91for information on the HOST_FUNCTION switch.

9.Restart the controllers using the following command:

NOTE: After restarting the other controller, the EMU alarm will sound. To stop it, restart this controller.

RESTART OTHER_CONTROLLER

RESTART THIS_CONTROLLER

See “RESTART controller” in Chapter 5, “CLI Commands.”

10.Set the time on the controller, which provides a baseline for replacing the external battery, using the following command:

SET THIS_CONTROLLER TIME=DD-MMM-YYYY:HH:MM:SS

NOTE: All values are numbers, except for MMM, which uses the first three letters of the month. When setting hours, minutes, and seconds—HH, MM, and SS—you must use 24-hour time.

Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide